U.S. Pacific Fleet
This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the “How to Apply” section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.
Pay Ranges: (Hourly pay)
WG-05: $25.75 – $30.03
WG-07: $30.49 – $35.59
WG-08: $32.78 – $38.22 This job does not have an education qualification requirement. Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible.
The Screen-out Element for this position is Reliability and Dependability, such as:
- You have received commendations for good work on the job, in school, in Armed Forces, in Job Corps, etc.;
- In the last 5 years, you have not left a job due to your own actions, only due to “end of work” or “project completion”;
- You have received better than average school grades or job appraisals.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification System for Trades and Labor Occupations
(X-118C). Additional qualification information can be found at: http://www.opm.gov/qualifications/x-118c/tabindx.asp.
Pearl Harbor Naval Shipyard is hiring for the following trades.
In order to be considered, identify the shop number and trade title of your interest in the subject line of your e-mail.
1. Shop 11 Shipfitter
– Lays out, fabricates, installs, removes, and repairs structural parts on Naval ships and support equipment in accordance with blueprints. Utilizes carpentry principles while working with welders to assemble various types of metal plates, beams, angles, and pipes. Shapes materials to conform to existing ship structures. Work may require use of heavy presses, saws, drill press, and assorted pneumatic and standard hand tools (e.g., hammers, wrenches, etc.).
2. Shop 26 Welder
– Joins and cuts all types of industrial and marine metals using complex welding and thermal cutting processes during the overhaul, repair, and modernization of submarines and surface craft. Joins metals using Shielded Metal Arc Welding, Gas Tungsten Arc Welding, Gas Metal Arc Welding, Laser Welding, and Submerged Arc Welding. Cuts metals using oxygen/ acetylene, plasma, and carbon arcing.
3. Shop 31 Machinist
– Manufacture and/or refurbish ship parts/components using machinery such as lathes, milling machines, boring machines, drilling presses, and computer numerical controlled machines. Disassemble, inspect, repair, machine, reassemble, and test components such as valves, compressors, shafting, pumps, and hydraulic equipment.
4. Shop 31 Rubber Worker
– Assist in the Manufacturing of the various rubber products to support repairs on US Navy Vessels. Work involves but is not limited to, preparing uncured rubber stock to manufacture Molded rubber products, by injection or transfer molding, using hydraulic presses/steam autoclaves for dry and wet steam curing, preparing/measuring/cutting and splicing various pre-formed rubber gasket or O-Ring strips of different diameters to required specifications and cleans and prepares components for application of plastic coat covering.
5. Shop 38 Marine Machinery
– Involve the use of the latest technology to install, remove, test, overhaul, and repair the main propulsion machinery, pumps, valves, steam turbines, engines, pumps, and propeller shafts on submarines and surface craft. Optically align and test steam/gas turbines, internal combustion engines, reduction gears, propeller shafts, pumps, valves, auxiliary engines, masts and antennas, torpedo tubes and associated ordnance equipment, and other shipboard components.
6. Shop 51 Electrician
– Assist journey level Electrician Mechanics in removal/install, alignment, repair, overhaul, and testing a variety of ships components that include ship’s main propulsion machinery, auxiliary machinery, deck machinery, ordnance machinery, hydraulic machinery, fluid systems, laundry, galley, and machine shop equipment. Install, maintain and remove temporary electrical and casualty control systems. May be assigned to shop work, crane electrical work, surface craft, or submarine non-nuclear/nuclear electrical work.
7. Shop 52 Electronics measurement Equipment Mechanic
– Inspects, troubleshoots, repairs, overhauls, modifies, tests, aligns, measures, and calibrates complex electrical/electronic/electro-mechanical/physical-dimensional/ mechanical test instruments and equipment.
8. Shop 67 Electronics
– Assist journey level Electronics Mechanics in the removal, troubleshooting, repair, modification, installation, testing and calibration of shipboard electronic equipment, components and testing. Systems include communications, sonar, fire control, steering/diving, imaging/optical, and power distribution. Manufacture, repair, and testing of various cabling including fiber optic cable/connectors, antennas, sonar transducers/hydrophones, amplifiers/transmitters and arrays. Calibration of various measurement and testing equipment.
9. Shop 06 Toolroom
– Assure the proper quality tools are available to allow workers to safely, efficiently and effectively accomplish assigned tasks. Perform periodic maintenance, overhaul, troubleshoot, repair and test hand-held and portable power tools and mechanical/electrical equipment. Inspect and maintain personnel protective equipment such as respirators and fall protection gear. Employ shop’s standard operating procedures and operate tool rooms to issue such equipment along with various hand tools and precision measuring equipment. Maintain record, report and conduct periodic inventories.
10. Shop 56 Air Conditioning
– Installs, troubleshoots, maintains, and repairs air conditioning and refrigeration systems aboard submarines, surface crafts, and ashore to include, but not limited to chillers, refrigeration plants, dehumidifiers, and dehydrators. Fabricates temporary cooling manifolds to support repairs of shipboard systems. Accomplish vacuum and pressure tests of Air Conditioning and Refrigeration systems. Conducts operational testing of Air Conditioning and Refrigeration systems.
11. Shop 56 Pipefitter
– Remove, repair, install, test/flush, and silver braze piping to all propulsion, auxiliary, and weapons systems aboard submarines and surface craft. Manufacture, install, repair, maintain, and remove all ship-to-shore temporary piping services.
12. Shop 99 Electrician (Temporary Service)
– Construct, remove/install, test, troubleshoot, maintain and repair various electrical wiring systems and components, electrical controls, electrically operated equipment or instruments; light and heavy electrical machinery. Install, maintain and remove temporary electrical and casualty control systems. May be assigned to shop work, crane electrical work, surface craft, or submarine non-nuclear/nuclear electrical work.
13. Shop 71 Maintenance Worker
– Handles hazardous Waste, Equipment Cleaning and Equipment Pump Operations on submarines, surface crafts and in shore facilities. Removes and replaces sludge tanks from boat or an area of operations, properly transfers, samples and dispose of waste
14. Shop 71 Painter
– Prepare surfaces for paints by sandblasting, and sanding. Apply paints, powder coating, or flame spray to preserve metal, wood, or sheet metal surfaces using paint brushes, spray pumps, and/or rollers.
15. Shop 64 Shipwright
– Install, maintain, modify and remove all staging associated with ship work. Use transits and levels to establish working lines and reference points. Check vessel alignment during docking evolution. Construct docking blocks and shoring. Other work includes rough and finish woodwork, and building mock-ups.
To apply for this job please visit www.usajobs.gov.